Clamcleat Line Lock

The Mini Line-Lok is a genuine Clamcleat, and it is different from every other cleat on this page in one important way: it does not screw to anything. It rigs on the rope itself.

The Mini Line-Lok Needs No Fasteners

Thread the cord through, and the Line-Lok becomes an inline adjuster. Slide it to tension, and the jaws grip. There is nothing to bolt to a deck, nothing to drill, and nothing to seal — which makes it the answer whenever you want adjustment somewhere you cannot or will not put a screw.

Tent and tarp guy lines are the classic use. On a boat: adjustable deck loops, a drawcord you want to lock, a hatch retainer you tension by hand, a stern light pole guy.

Size and Line

• Approximately 13/16" long

• For cord 1mm to 3mm (roughly 3/64" to 1/8")

• Injection-moulded nylon, cold-grade

That line range is the thing to check. This is a small fitting for thin cord. Our 2mm and 3mm accessory cords are right for it; 4mm is at the top end and 1/4" deck line will not fit at all. For thicker line you want the zig cleat instead.

Mini Line-Lok and the Rest of the Clamcleat Range

Clamcleat makes a family and it is easy to buy the wrong one. The Mini Line-Lok is the smallest at about 13/16". Above it sit the Small at around 1-1/4" for 2–5mm cord, then Medium and Large for progressively heavier line. If your cord is thicker than 3mm, ask at the counter and we will point you up the range.

Details

• Clamcleat Mini Line-Lok

• Rigs on the rope — no fasteners required

• For 1–3mm cord

• Approximately 13/16" long

• Injection-moulded nylon

At our Clearwater shop, with the cord to match on the reel.